[JWW/JWC File Settings - Export] Dialog Box
On [JWW/JWC File Settings - Export] dialog box, you can modify the following settings.
[Prefer not to convert shape of part drawing layout to block]
Turn it on to convert shapes on part drawings in individual part drawing layout as shapes on layer groups 0 to F only when conditions are met (See Saving in Jw_cad file format (JWW).) Turn it off to convert shapes as blocks by part drawing layout.
[Default Paper Setting]
Set the default value for automatically placing the part drawing layout on paper and exporting when exporting is executed with a part drawing selected in a drawing that does not have any shapes on paper.
Paper
[Paper Type]
Set the type of paper. When selecting [Specify Size], input vertical and horizontal sizes of paper in [Paper Size] box.
[Paper Orientation]
Set the orientation of paper.
[Paper Size]
Displays the current paper size. When selecting [Specify Size] in [Paper Type] box, you can input vertical and horizontal sizes of paper.
Scale
Set the scale when the selected part drawing is placed on paper as a part drawing layout.
If you select [Fit to paper], the placement scale of the part drawing layout is automatically adjusted to fit the paper size.
Select [Specify Scale] to specify the location scale of the part drawing layout. Enter the location scale numerator/location scale denominator in the [Scale] box.
[Locate Base]
Selecting [Bottom Left] aligns the bottom left corner of the shape area with the bottom left corner of the paper, while selecting [Center] aligns the center of the display area with the center of the paper.
[Margin]
Moves the placement origin from the origin of the paper in the positive X and Y directions by the entered value.
[Default settings]
Reset to default value.
[View before execution]
Turn it on to display this dialog box when executing export.