# Rotating and Moving Shape

1. Point [Move] on  menu, and click [Rotate & Move].
Then you will be able to rotate and move a shape.
2.  Supplemental ▪ You can enter into the shape rotating & moving status by clicking on  toolbar.
3. Select a shape to rotate and move.
4. Click the base point for rotating and moving on the drawing.

### When specifying rotation angle in numeric values

1. Switch the parameter on Command Window to [Angle], and input a rotation angle.
2. Click a position where a shape is to be rotated and moved on the drawing.
A shape will be rotated and moved to the clicked position.

### When specifying direction point for rotating

1. Switch the parameter on Command Window to [Angle], and click the direction point for rotating on the drawing.
2. Click a position where a shape is to be rotated and moved on the drawing.
The selected shape will be rotated and moved to the clicked position.

### When rotating a shape using the angle between the base point and the specified point as that for the line connecting the locate point and the specified point

1. Switch the parameter on Command Window to [Angle Base Point], and click the angle base point for rotating on the drawing.
2. Click a position for rotating & moving on the drawing.
3. Click a point to decide angle on the drawing.
The selected shape will be rotated & moved with the angle between the line connecting the base point and angle base point, and that connecting the locate point and the point to decide angle.
 Supplemental ▪ You can specify the base point, angle, angle base point, locate point and point to decide angle by inputting X and Y coordinates in [Base Point], [Angle], [Angle Base Point], [Locate Point], and [Point to decide angle] boxes on Command Window. ▪ To input a relative position from the base point as the locate point, input coordinate values using [@X coordinate , (comma) Y coordinate] format in [Locate Point] box on Command Window.